Speck-electronics Xtramix Manual de usuario descargar pdf (Pagina 23)

There are two types of In-Place solo incorporated into the Xtramix:

Absolute and True. All input channel solos are Absolute In-place. This

means that a soloed signal will be perceived in the same stereo or mono

perspective being produced by the instrument itself. The solos on the

effects returns and the monitor channels are True In-Place

and follow the position of the channels pan/balance control.

Unlike True In-Place solo, the position of the input channel Balance/Pan

control will have no bearing on the left/right perspective in the Absolute

solo mode. Additionally, if a stereo instrument is connected to a

channel being operated in the stereo mode (see Stereo/Mono Switch and

Channel Input Connectors description, Rear Panel), then soloing that

channel yields a stereo solo signal. If the channel is set to operate in

mono, then soloing that channel will yield a centered mono solo signal.

The solo listening level can be controlled by either adjusting the Input

Level Control, the Master Monitor or Headphone level, although

adjusting the Master Monitor or Headphone level will not affect any

relative balance created with the Input Level Control.

Be aware that the solo circuit activated by this or any other solo switch

on the Xtramix will feed the Monitor Master and/or Headphones as well

as the Tuner Feed outputs. The stereo program outputs are unaffected

by the solo function.

This bank of pushbutton switches, in conjunction with the input channel

Balance/Pan Control (see above), allows an input channel to be assigned

to any of eight individual su/jointfilesconvert/1705819/bgroups or any of four su/jointfilesconvert/1705819/bgroup pairs.

A channel is “Muted” as long as it is not assigned to any su/jointfilesconvert/1705819/bgroup(s).

When the Su/jointfilesconvert/1705819/bgroup Assign Changeover Switch (see below) is in the up

position, pressing the 1-2/5-6 Assign Switch routes the input channel

signal to the 1-2 su/jointfilesconvert/1705819/bgroup pair. When the Su/jointfilesconvert/1705819/bgroup Assign Changeover

Switch is in the down position, pressing the 1-2/5-6 Assign button routes

the input channel signal to the 5-6 su/jointfilesconvert/1705819/bgroup pair. In the up position, all

signal flow to the 1-2 or 5-6 su/jointfilesconvert/1705819/bgroups is muted.

Channel Su/jointfilesconvert/1705819/bgroup

Assign/Mute Section

5. 1-2/5-6 Su/jointfilesconvert/1705819/bgroup Assign/

Mute Switch

Chapter 4 Operation Section

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 55 56

Sin comentarios

Speck-electronics Xtramix Manual de usuario Pagina 23